Oil burner pumps (BFP), Danfoss/Hago nozzles, oil pre-heaters, ignition units and burner controls — the complete oil line from one manufacturer
Danfoss Burner Components is the most widespread component supplier inside an oil burner — and across the Nordic installed base, very likely the name stamped on more spare parts than any other. The programme covers the complete oil line from a single manufacturer: oil burner pumps in the BFP series (which draw, filter, pressurise and deliver a steady flow of oil to the nozzle), precision nozzles from Danfoss and Hago (which atomise the oil into a fine mist for clean, efficient combustion), oil pre-heaters of the FPHB type (which bring the oil to the right viscosity for reliable ignition), electronic ignition units in the EBI4 series (which deliver the spark), oil burner controls in the OBC series (which manage the entire start sequence) and photocells (LDS) that monitor the flame. With so many critical parts coming from the same Danish manufacturer, Danfoss is the natural first port of call when something needs replacing: the pump, nozzle, pre-heater, ignition unit or control is available as a stocked spare part and fits the very large base of burners already installed across Scandinavian buildings, industry and process plants. The need does not stop at the quayside: in marine and offshore installations, a reliable oil supply, ignition and flame monitoring are every bit as critical as they are ashore. The components are HVO-ready and follow the transition to renewable, paraffinic fuels — the pump builds the pressure, the nozzle atomises and the control runs the sequence just as safely on HVO as on fossil heating oil.
Key points:
- The complete oil line from one manufacturer — pump, nozzle, pre-heater, ignition, control and photocell
- BFP oil burner pumps: draw, filter, pressurise and deliver a steady flow to the nozzle
- Danfoss/Hago nozzles: precision atomisation, 100% tested, stainless steel and brass
- EBI4 ignition units, FPHB oil pre-heaters, OBC burner controls and LDS photocells
- HVO-ready and widely stocked as spares for the installed base — industry, process, projects, marine
Model overview (product families):
| Product group | Series / type | Function |
|---|---|---|
| Oil burner pump | BFP 11 / BFP 20 / BFP 21 / BFP 41 / BFP 52 (BFP B, Bio 100 – HVO) | Suction, filtration, pressure build-up and steady delivery (one-/two-pipe operation) |
| Oil nozzle | Danfoss S (solid) / H (hollow) / B (semi-solid), Hago (e.g. 030B0610: 35.6 kW, 60°S, 10 bar, HVO) | Atomisation; flow rate × spray angle × spray pattern (e.g. 0.50 60° S) |
| Oil pre-heater | FPHB series | Heats the oil to the right viscosity for reliable, clean ignition |
| Ignition unit | EBI4, EBI4 M | Electronic high-voltage ignition (replaces older ignition transformers) |
| Oil burner control | OBC 80 / OBC 82 / OBC 83 | Manages the start, run and safety sequence of the oil burner |
| Flame detector | LDS (photocell) | Monitors the flame and locks out on flame failure |
We compile the exact model and part number list from the Danfoss Burner Components catalogue on request (no fixed part number table published here).
Find the right Danfoss component — contact us at info@arnenielsen.dk.
Frequently asked questions about Danfoss
Is Danfoss distributed by Arne Nielsen A/S?
Yes. Arne Nielsen A/S has supplied burners, boilers and spare parts to professional customers since 1969, and carries Danfoss as part of its programme for Nordic, marine, offshore and project installations. On this microsite the focus is on those segments — for sales inside the UK please contact your local distributor.
Can you supply spare parts for older or discontinued Danfoss models?
Often, yes. We hold a strong spare-parts position and can also help with older and discontinued models. Tell us the model and the details from the nameplate or type label, and we will identify the correct part — write to us at info@arnenielsen.dk.
How do I order Danfoss from Arne Nielsen A/S?
Contact us with the model or part number and the quantity you need, and we will confirm availability and delivery. Reach us at info@arnenielsen.dk or on +45 56 21 50 50. For sales inside the UK please contact your local distributor.
Learn more about Arne Nielsen A/S, or browse all Danfoss news and updates.
“This is a “language marketing” microsite for our Nordic, marine, offshore and project sales. For sales inside the UK please contact your local distributor. Please note that we sometimes carry some discontinued spare parts that may no longer be available in your territory.”
